‘modelling’ students

frontfloorswinI26/4/17…..we decided to create a model of the tower and cottages,Maria Z and I took the tower and interior,Justin M the cottages. the plans proved priceless. I created a base chamfered the edges then using the re-scale tool stretched the bottom poly out to give a 60 degree buttress. The front wall is created to correct scale except the walls are only 0.5 metres thick( instead of 2.1m) this will give Maria and the interiors a little wiggle room. The front wall is almost vertical,the side walls lean in creating a taper effect, the internal structures were reduced accordingly from bottom to top. I essentially created a shelving unit, which could receive the extruded floors as seen above left. The windows were Boolean extractions,there are about 30 openings in the walls,10 windows and 20 defensive positionsdefencive slots of various sizes.(see left) this part of the building process is straight forward enough, the window frames,(cut stone)windows ( some with 30 panes of glass each side) may prove to be a little less co-operative………